ProMounds Designated Hitter Pitching Dummy The Designated Hitter is the perfect tool for your next pitching training session. This bullpen dummy will stand next to the plate while your practice your pitches. This pitching dummy can act as a right handed or left handed batter, so you can practice with both sides! You can move the dummy in closer and crowd the plate, or move them back, fitting the needs of the pitcher. The Designated Hitter stands at 5’2″, closely imitating your next batter face off. Features Pitching Dummy stands 5’2″ Weight: 36 lbs. Switch hitter: stands righty or lefty Comes in blue, red, or gray Strong and durable material Stands on weighted base for stability Beveled edges for catcher safety
| Brands | |
|---|---|
| Color | |
| Special Filters |
| Power Input | 100 – 240V ̴ 50/60 Hz |
| Signal-to-Noise Ratio | > 80dB |
| Output power (W) | 100W RMS (IEC60268) |
| Dynamic frequency response range (Hz) | 40Hz – 20kHz (-6dB) |
| Frequency Response | 40Hz – 20kHz (-6dB) |
| Transducer | 1 x 5.25 inch (135mm) woofers, 2 x 1 inch (25mm) Dome tweeters |
| Dimensions (Width x Height x Depth) (cm) | 32.0 x 33.9 x 26.3 |
| Dimensions (Width x Height x Depth) (in) | 12.58 x 13.33 x 10.35 |
| Weight (kgs) | 6.4 |
| Weight (lbs) | 14.11 |
| Aux-In | 370 mV RMS (3.5mm connector) |
| Mic-In | 20 mV RMS |
| Guitar-In | 100 mV RMS |
| Bluetooth Input (dBFS) | -9 |
| USB Input (dBFS) | -9 |
| USB Format | FAT16, FAT32 |
| Bluetooth Profile | A2DP V1.4, AVRCP V1.6(SW), TMAP1.0, PBP1.0 |
| Bluetooth Transmitter Frequency Range (GHz) | 2.402GHZ~2.480 |
| Bluetooth Transmitter Modulation | GFSK, π/4 DQPSK, 8DPSK ,BLE1M, BLE2M |
| Bluetooth Transmitter Power | ≤ 16 dBm (EIRP) |
| Bluetooth version | 5.4 |
| Charging time (hours from empty) | < 3.5 |
| Cabel Type | AC power cable (type varies by regions) |
| Cable Length (ft) | 6.6 |
| Cable Length (m) | 2 |
| Battery Type | JBL Battery 200, Li-ion Battery(7.4V/4722mah) |
| Battery Charge Time (hours) | 3.5 |
| Maximum music playing time (hrs) | 15 |
Popular essentials for your audio device
