AltRider Reinforcement Crash Bars for the BMW R 1300 GS BMW's R 1300 GS is a powerful and versatile bike capable of eating up highway miles and tackling trails in the same trip. But if you're counting on OEM crash bars to protect your engine then you should know that these can do more harm than good. It has been documented that the OEM bars' hard rubber pad can punch a hole in the cylinder header which is why AltRider has produced a Reinforcement Bar to brace against impact and strengthen the entire crash bars structure. The Altrider design directs force in an almost straight line to the frame of the motorcycle with no unnecessary bends or flimsy band clamps to bend under load. 1 inch (25.4 mm) diameter stainless steel tubing Heat-treated and CNC-machined through bolt included Mounts to OEM bars with full-wrap two-part high-strength alloy industrial clamps Available in silver shot peen or black powder coat finish Starting with 1 inch (25.4 mm) diameter stainless steel tubing the Reinforcement Bar is laser cut, CNC bent and hand TIG welded in the United States. The Reinforcement Bars mount at the engine with an included engine through bolt. Unlike other designs that use plastic inserts, this heat-treated and CNC-machined through bolt provides critical strength and stability and AltRider is the only one on the market to utilize this design. The Reinforcement Bars mount to the OEM bars with full-wrap two-part high-strength alloy industrial clamps attached to 3/16 inch (4.7 mm) thick mounting flanges. Installation and removal is a 15 minute job with the included stainless steel hardware. AltRider's Reinforcement Bars are available in silver shot peen or black powder coat finish. Compatible with OEM accessory crash bars. Compatible with R 1300 GS OEM accessory crash bars Product CodeProduct VariationR130-1-1005Color: Silver
| Brands | |
|---|---|
| Color | |
| Special Filters |
| Power Input | 100 – 240V ̴ 50/60 Hz |
| Signal-to-Noise Ratio | > 80dB |
| Output power (W) | 100W RMS (IEC60268) |
| Dynamic frequency response range (Hz) | 40Hz – 20kHz (-6dB) |
| Frequency Response | 40Hz – 20kHz (-6dB) |
| Transducer | 1 x 5.25 inch (135mm) woofers, 2 x 1 inch (25mm) Dome tweeters |
| Dimensions (Width x Height x Depth) (cm) | 32.0 x 33.9 x 26.3 |
| Dimensions (Width x Height x Depth) (in) | 12.58 x 13.33 x 10.35 |
| Weight (kgs) | 6.4 |
| Weight (lbs) | 14.11 |
| Aux-In | 370 mV RMS (3.5mm connector) |
| Mic-In | 20 mV RMS |
| Guitar-In | 100 mV RMS |
| Bluetooth Input (dBFS) | -9 |
| USB Input (dBFS) | -9 |
| USB Format | FAT16, FAT32 |
| Bluetooth Profile | A2DP V1.4, AVRCP V1.6(SW), TMAP1.0, PBP1.0 |
| Bluetooth Transmitter Frequency Range (GHz) | 2.402GHZ~2.480 |
| Bluetooth Transmitter Modulation | GFSK, π/4 DQPSK, 8DPSK ,BLE1M, BLE2M |
| Bluetooth Transmitter Power | ≤ 16 dBm (EIRP) |
| Bluetooth version | 5.4 |
| Charging time (hours from empty) | < 3.5 |
| Cabel Type | AC power cable (type varies by regions) |
| Cable Length (ft) | 6.6 |
| Cable Length (m) | 2 |
| Battery Type | JBL Battery 200, Li-ion Battery(7.4V/4722mah) |
| Battery Charge Time (hours) | 3.5 |
| Maximum music playing time (hrs) | 15 |
Popular essentials for your audio device
