Dark Light
-14%

Clipacore Knock Out Tool QCKOT

Availability:

$ 12.82

Description Clipacore Knock Out Tool QCKOT. The Clipacore Debris Knockout Tool is designed to fit inside the core adaptors, upon disconnecting from the drill adaptor. The adaptor which comes with the long impact pin helps guide the pin and protect the end face of core adaptor from damage. The pin can be used on hard substrates such as concrete block or brick work and is not advised for use on soft mortar joints if in centre of core bit as this may affect removal. THE KNOCK OUT TOOL OVERCOMES THE NEED FOR HAMMERING CORE BITS AND DENTING THEM, WHICH CAUSES RESISTANCE AND THE DRILL TO LOCK UP! Clipacore Knock Out Tool for releasing brick/debris etc. jammed inside the core bit. (Core Adaptor and Core Bit Shown with the Knock Out Tool Sold Separately).
Brands

Color

Special Filters

,

Power Input 100 – 240V ̴ 50/60 Hz
Signal-to-Noise Ratio > 80dB
Output power (W) 100W RMS (IEC60268)
Dynamic frequency response range (Hz) 40Hz – 20kHz (-6dB)
Frequency Response 40Hz – 20kHz (-6dB)
Transducer 1 x 5.25 inch (135mm) woofers, 2 x 1 inch (25mm) Dome tweeters
Dimensions (Width x Height x Depth) (cm) 32.0 x 33.9 x 26.3
Dimensions (Width x Height x Depth) (in) 12.58 x 13.33 x 10.35
Weight (kgs) 6.4
Weight (lbs) 14.11
Aux-In 370 mV RMS (3.5mm connector)
Mic-In 20 mV RMS
Guitar-In 100 mV RMS
Bluetooth Input (dBFS) -9
USB Input (dBFS) -9
USB Format FAT16, FAT32
Bluetooth Profile A2DP V1.4, AVRCP V1.6(SW), TMAP1.0, PBP1.0
Bluetooth Transmitter Frequency Range (GHz) 2.402GHZ~2.480
Bluetooth Transmitter Modulation GFSK, π/4 DQPSK, 8DPSK ,BLE1M, BLE2M
Bluetooth Transmitter Power ≤ 16 dBm (EIRP)
Bluetooth version 5.4
Charging time (hours from empty) < 3.5
Cabel Type AC power cable (type varies by regions)
Cable Length (ft) 6.6
Cable Length (m) 2
Battery Type JBL Battery 200, Li-ion Battery(7.4V/4722mah)
Battery Charge Time (hours) 3.5
Maximum music playing time (hrs) 15

 

SHOPPING CART

close