Description Clipacore Quick release HEX driver The Clipacore HEX Driver Drill Arbor QCHEX is designed to fit into any standard HEX Percussion Drill. This product should only be used in conjunction with the purposely designed Clipacore Core Adaptors, the Clipacore DUOCUT Adaptor (core in core system), the “Fluemate” system or “Chuckaway” Extension Bar QCCAEB. THIS OVERCOMES THE NEED FOR USING ANY TOOLS TO REMOVE CORE BITS DUE TO HIGH TORQUE TENSION FROM THE DRILLING EQUIPMENT AND PROTECTS YOUR HANDS FROM INJURY!
| Brands | |
|---|---|
| Color | |
| Special Filters |
| Power Input | 100 – 240V ̴ 50/60 Hz |
| Signal-to-Noise Ratio | > 80dB |
| Output power (W) | 100W RMS (IEC60268) |
| Dynamic frequency response range (Hz) | 40Hz – 20kHz (-6dB) |
| Frequency Response | 40Hz – 20kHz (-6dB) |
| Transducer | 1 x 5.25 inch (135mm) woofers, 2 x 1 inch (25mm) Dome tweeters |
| Dimensions (Width x Height x Depth) (cm) | 32.0 x 33.9 x 26.3 |
| Dimensions (Width x Height x Depth) (in) | 12.58 x 13.33 x 10.35 |
| Weight (kgs) | 6.4 |
| Weight (lbs) | 14.11 |
| Aux-In | 370 mV RMS (3.5mm connector) |
| Mic-In | 20 mV RMS |
| Guitar-In | 100 mV RMS |
| Bluetooth Input (dBFS) | -9 |
| USB Input (dBFS) | -9 |
| USB Format | FAT16, FAT32 |
| Bluetooth Profile | A2DP V1.4, AVRCP V1.6(SW), TMAP1.0, PBP1.0 |
| Bluetooth Transmitter Frequency Range (GHz) | 2.402GHZ~2.480 |
| Bluetooth Transmitter Modulation | GFSK, π/4 DQPSK, 8DPSK ,BLE1M, BLE2M |
| Bluetooth Transmitter Power | ≤ 16 dBm (EIRP) |
| Bluetooth version | 5.4 |
| Charging time (hours from empty) | < 3.5 |
| Cabel Type | AC power cable (type varies by regions) |
| Cable Length (ft) | 6.6 |
| Cable Length (m) | 2 |
| Battery Type | JBL Battery 200, Li-ion Battery(7.4V/4722mah) |
| Battery Charge Time (hours) | 3.5 |
| Maximum music playing time (hrs) | 15 |
Popular essentials for your audio device
